350-501 Exam Study Guide Free Practice Test LAST UPDATED DATE Nov 11, 2022
The New 350-501 2022 Updated Verified Study Guides & Best Courses
NEW QUESTION 140
Refer to the exhibit:
What does this value mean when it is received in XML?
- A. It indicates a value assigned by a network administrator to tag a route
- B. It means a data fie4d is blank
- C. It shows the ending of the script
- D. It indicates a break in a sequence
Answer: B
NEW QUESTION 141 
Refer to the exhibit. Assume all other configurations are correct and the network is otherwise operating normally.
Which conclusion can you draw about the neighbor relationship between routers R1 and R2?
- A. The neighbor is down because the local-as value for R2 is missing in the R1 neighbor statement.
- B. The neighbor relationship is down because R1 believes R2 is in AS 65012.
- C. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family.
- D. The neighbor relationship is up.
Answer: B
Explanation:
Section: Networking
NEW QUESTION 142
What is a role of NSO?
- A. It provides full lifecycle management of a device.
- B. It resides on a hypervisor that runs the Windows OS.
- C. It automates the deployment of access points with its built-in wireless LAN controller.
- D. It manages WAN infrastructure using a virtual switch.
Answer: A
NEW QUESTION 143
What is the difference between SNMP and model-driven telemetry?
- A. SNMP uses the YANG data modeling language
- B. Telemetry allows for modeled network data to be pushed to the network administrator on an as-needed basis
- C. Telemetry uses traps and inform messages to deliver data to a network administrator on a polling basis
- D. SNMP pushes network data to the network administrator whenever it is queried
Answer: B
NEW QUESTION 144
Why do packet loops occur during the configuration of BlDlR-PIM?
- A. The network is partially upgraded to support BIDlR-PIM
- B. The router has not been configured to advertise itself
- C. The network does not support BIDIR-PIM
- D. No interface for carrying traffic for multicast groups has been configured
Answer: D
NEW QUESTION 145
Which configuration modifies Local Packet Transport Services hardware policies?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
NEW QUESTION 146
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
NEW QUESTION 147
Refer to the exhibit:
What does the REST API command do?
- A. It displays the information identified by Descriptions xml
- B. It executes the commands specified in Descriptions xml
- C. It retrieves the information requested by Descriptions xml
- D. It removes the information identified by Descriptions xml
Answer: B
NEW QUESTION 148
Why do packet loops occur during the configuration of BlDlR-PIM?
- A. The network is partially upgraded to support BIDlR-PIM
- B. The router has not been configured to advertise itself
- C. The network does not support BIDIR-PIM
- D. No interface for carrying traffic for multicast groups has been configured
Answer: A
NEW QUESTION 149
Refer to the exhibits:
R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2 R1 message periodically Based on this output, which statement is true?
- A. IS-IS neighbor authentication is failing for Level 1 PDUs only
- B. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs
- C. IS-IS neighbor authentication is failing for Level 2 PDUs only.
- D. 1S-1S neighbor authentication is failing for Level 1 and Level 2 PDUs .
Answer: A
NEW QUESTION 150
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: B
NEW QUESTION 151
Refer to the exhibit. The USER that is connecting an application on an Internet connection in AS
100 is facing these issues:
- The USER lost the connection to the application during a failure
between IG and R2.
- Router R2 configuration is lost due to a power outage.
- The application the USER is connecting to is hosted behind CE2.
What action resolves the issues on R3 and R4 routers?
- A. Apply high Local Preference on R3 toward R1
- B. Set R3 as a route reflector for R4 and CE1
- C. Set R4 as a route reflector for R3 and CE2
- D. Apply low Local Preference on R4 toward R2.
Answer: D
NEW QUESTION 152
Refer to the exhibit. An engineer is preparing to implement link aggregation configuration.
Which statement al about this configuration is true?
- A. The switch port accepts LACP and PAgP packets from a connected peer and negotiate an EtherChannel using the common EtherChannel mode.
- B. The switch port negotiates an EtherChannel if it receives LACP packets from a connected peer
- C. The switch port passively negotiates an EtherChannel if it receives PAgP packets from a connected peer
- D. The switch port actively sends packets to negotiate an EtherChannel using PAgP
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/trash/swethchl.html
NEW QUESTION 153 
Refer to the exhibit. Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?
- A. 49.0111.0000.0000.0001.00
- B. 49.0001.0000.0000.0004.00
- C. 49.0011.0000.0000.0002.00
- D. 49.0011.0000.0000.0003.00
Answer: D
Explanation:
Section: Networking
NEW QUESTION 154
Refer to the exhibit:
Which three outcomes occur if the prefix list is added to the neighbor? (Choose three)
- A. 192.168.0.0/16 is denied
- B. 192.168 0.0/17 is permitted
- C. 192.168 0.0/19 is denied.
- D. 192.168 0.0/16 is permitted
- E. 192.168 0.0/19 is permitted
- F. 192.168 0.0/17 is denied.
Answer: A,B,E
NEW QUESTION 155
A customer of an ISP requests support to setup a BGP routing policy. Which BGP attribute should be configured to choose specific BGP speakers as preferred exit points for the customer AS?
- A. lowest local preference inbound
- B. highest local preference inbound
- C. highest local preference outbound
- D. lowest multi-exit discriminator
Answer: C
NEW QUESTION 156
What are two features of stateful NAT64? (Choose two.)
- A. It provides 1:N translations, so it supports an unlimited number of endpoints.
- B. It provides 1:1 translation, so it supports a limited number of endpoints.
- C. It requires IPv4-translatable IPv6 address assignments.
- D. It uses address overloading.
- E. It requires the IPv6 hosts to use either DHCPv6-based address assignments or manual address assignments.
Answer: A,D
NEW QUESTION 157
......
Get Prepared for Your 350-501 Exam With Actual 330 Questions: https://crucialexams.lead1pass.com/Cisco/350-501-practice-exam-dumps.html