Pass Your Exam Easily! 300-710 Real Question Answers Updated on Dec 14, 2025
Actual Questions Answers Pass With Real 300-710 Exam Dumps
NEW QUESTION # 29
Which file format can standard reports from Cisco Secure Firewall Management Center be downloaded in?
- A. csv
- B. xls
- C. ppt
- D. doc
Answer: A
Explanation:
Standard reports from Cisco Secure Firewall Management Center can be downloaded in CSV (Comma-Separated Values) format. This format is widely used for data exchange and can be opened in various applications such as Microsoft Excel.
Steps to download reports:
Navigate to Reports > Report Designer in the FMC.
Select or create the report you wish to download.
Choose the CSV format option when exporting the report. This allows the network engineer to analyze and manipulate the report data easily.
NEW QUESTION # 30
An administrator must use Cisco FMC to install a backup route within the Cisco FTD to route traffic in case of a routing failure with the primary route. Which action accomplishes this task?
- A. Use a default route on the FMC instead of having multiple routes contending for priority.
- B. Configure EIGRP routing on the FMC to ensure that dynamic routes are always updated.
- C. Install the static backup route and modify the metric to be less than the primary route.
- D. Create the backup route and use route tracking on both routes to a destination IP address in the network.
Answer: C
NEW QUESTION # 31
An engineer is configuring Cisco FMC and wants to allow multiple physical interfaces to be part of the same VLAN. The managed devices must be able to perform Layer 2 switching between interfaces, including sub-interfaces. What must be configured to meet these requirements?
- A. integrated routing and bridging
- B. Cisco ISE Security Group Tag
- C. interface-based VLAN switching
- D. inter-chassis clustering VLAN
Answer: A
NEW QUESTION # 32
Refer to the exhibit.
What is the effect of the existing Cisco FMC configuration?
- A. The managed device is deleted from the Cisco FMC.
- B. The SSL-encrypted communication channel between the Cisco FMC and the managed device becomes plain-text communication channel.
- C. The management connection between the Cisco FMC and the Cisco FTD is disabled.
- D. The remote management port for communication between the Cisco FMC and the managed device changes to port 8443.
Answer: C
NEW QUESTION # 33
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by assigning an inline set interface
- B. by using a BVI and create a BVI IP address in the same subnet as the user segment
- C. by bypassing protocol inspection by leveraging pre-filter rules
- D. by leveraging the ARP to direct traffic through the firewall
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION # 34
What is the difference between inline and inline tap on Cisco Firepower?
- A. Inline tap mode does full packet capture.
- B. Inline mode cannot do SSL decryption.
- C. Inline mode can drop malicious traffic.
- D. Inline tap mode can send a copy of the traffic to another device.
Answer: C
Explanation:
A threat defense in inline interface mode can block unintended traffic while it remains invisible to the network hosts. Inline mode allows a threat defense to block traffic based on the access control and intrusion rules you enable.
NEW QUESTION # 35
A network engineer must configure IPS mode on a Secure Firewall Threat Defense device to inspect traffic and act as an IDS. The engineer already configured the passive-interface on the Secure Firewall Threat Defense device and SPAN on the switch. What must be configured next by the engineer?
- A. intrusion policy on the Secure Firewall Threat Defense device
- B. DHCP on the switch
- C. active interface on the Secure Firewall Threat Defense device
- D. active SPAN port on the switch
Answer: A
Explanation:
To configure IPS mode on a Cisco Secure Firewall Threat Defense (FTD) device to inspect traffic and act as an IDS, the network engineer must configure an intrusion policy on the FTD device.
The passive-interface and SPAN on the switch have already been configured, which means the traffic is being mirrored to the FTD. The next step is to set up an intrusion policy that defines the rules and actions for detecting and responding to malicious traffic.
Steps:
In FMC, navigate to Policies > Intrusion.
Create a new intrusion policy or edit an existing one.
Define the rules and actions for detecting threats.
Apply the intrusion policy to the relevant interfaces or access control policies. This configuration enables the FTD to inspect the mirrored traffic and take appropriate actions based on the defined intrusion policy.
NEW QUESTION # 36
An engineer has been tasked with providing disaster recovery for an organization's primary Cisco FMC. What must be done on the primary and secondary Cisco FMCs to ensure that a copy of the original corporate policy is available if the primary Cisco FMC fails?
- A. Configure high-availability in both the primary and secondary Cisco FMCs
- B. Restore the primary Cisco FMC backup configuration to the secondary Cisco FMC device when the primary device fails
- C. Connect the primary and secondary Cisco FMC devices with Category 6 cables of not more than 10 meters in length.
- D. Place the active Cisco FMC device on the same trusted management network as the standby device
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html
NEW QUESTION # 37
When deploying a Cisco ASA Firepower module, an organization wants to evaluate the contents of the traffic without affecting the network. It is currently configured to have more than one instance of the same device on the physical appliance Which deployment mode meets the needs of the organization?
- A. inline tap monitor-only mode
- B. inline mode
- C. passive tap monitor-only mode
- D. passive monitor-only mode
Answer: D
NEW QUESTION # 38
Which action must be taken to configure an isolated bridge group for IRB mode on a Cisco Secure Firewall device?
- A. Remove the route from the routing table.
- B. Add the restricted segment to the ACL.
- C. Define the NAT pool for the blocked traffic.
- D. Leave BVI interface name empty.
Answer: D
Explanation:
To configure an isolated bridge group for Integrated Routing and Bridging (IRB) mode on a Cisco Secure Firewall device, the action to take is to leave the BVI (Bridge Virtual Interface) interface name empty. This ensures that the bridge group operates in an isolated manner, where Layer 3 routing is not applied to the bridged interfaces, effectively isolating the traffic within the bridge group.
Steps:
Access the firewall's configuration interface.
Configure the bridge group interfaces.
Ensure that the BVI interface name is left empty to isolate the bridge group.
This configuration prevents Layer 3 routing for the isolated bridge group, ensuring that traffic remains contained within the bridge group.
NEW QUESTION # 39
An engineer defines a new rule while configuring an Access Control Policy. After deploying the policy, the rule is not working as expected and the hit counters associated with the rule are showing zero. What is causing this error?
- A. Logging is not enabled for the rule.
- B. The rule was not enabled after being created.
- C. The wrong source interface for Snort was selected in the rule.
- D. An incorrect application signature was used in the rule.
Answer: B
NEW QUESTION # 40
An engineer must create an access control policy on a Cisco Secure Firewall Threat Defense device. The company has a contact center that utilizes VoIP heavily, and it is critical that this traffic is not .... by performance issues after deploying the access control policy Which access control Action rule must be configured to handle the VoIP traffic?
- A. block
- B. trust
- C. monitor
- D. allow
Answer: B
Explanation:
To ensure that VoIP traffic in a contact center is not impacted by performance issues after deploying an access control policy on a Cisco Secure Firewall Threat Defense (FTD) device, the engineer should configure the access control rule with the "trust" action. The "trust" action allows traffic to bypass inspection and policy enforcement, ensuring that critical VoIP traffic is not delayed or degraded.
Steps:
* In FMC, navigate to Policies > Access Control > Access Control Policy.
* Create a new rule or edit an existing rule.
* Set the source and destination for the VoIP traffic.
* Set the action to "trust" to ensure the VoIP traffic is not inspected.
By configuring the rule with the "trust" action, the VoIP traffic will be prioritized, maintaining the quality and performance required for the contact center operations.
References: Cisco Secure Firewall Management Center Configuration Guide, Chapter on Access Control Policies and Traffic Management.
NEW QUESTION # 41
Which description of a passive interface on a Cisco Firepower NGFW is true?
- A. Effected by firewall mode
- B. Retransmits received traffic
- C. Inaccessible when disable
- D. Receives traffic that is specified on an NGIPS
Answer: D
Explanation:
NEW QUESTION # 42
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service? (Choose two.)
- A. inbound port TCP/443
- B. inbound port TCP/80
- C. outbound port TCP/80
- D. outbound port TCP/8080
- E. outbound port TCP/443
Answer: C,E
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118852-technote-firesight-00.html
https://community.cisco.com/t5/security-documents/ftd-url-filtering-how-it-works/ta-p/3347292
NEW QUESTION # 43
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. IRB
- B. FlexConfig
- C. BDI
- D. SGT
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html
NEW QUESTION # 44
Which protocol establishes network redundancy in a switched Firepower device deployment?
- A. VRRP
- B. GLBP
- C. STP
- D. HSRP
Answer: C
NEW QUESTION # 45
When do you need the file-size command option during troubleshooting with packet capture?
- A. when capture packets exceed 32 MB
- B. when capture packets are restricted from the secondary memory
- C. when capture packets exceed 10 GB
- D. when capture packets are less than 16 MB
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/troubleshooting_the_system.html
NEW QUESTION # 46
Which protocol establishes network redundancy in a switched Firepower device deployment?
- A. VRRP
- B. GLBP
- C. STP
- D. HSRP
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_threat_defense_high_availability.html
NEW QUESTION # 47
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Maximum Detection
- B. Security Over Connectivity
- C. Connectivity Over Security
- D. Balanced Security and Connectivity
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html
NEW QUESTION # 48
......
New 300-710 Dumps - Real Cisco Exam Questions: https://crucialexams.lead1pass.com/Cisco/300-710-practice-exam-dumps.html